Example: Reading out the SPice10211 potentiometers

The following sample program will read in the two potentiometers on the SPice10211 and display t he raw readings on the LCD on an MS12

;PotDisp.spt   Display SPice10211 potentiometers on MS12 LCD

                ON              20              ;LCD backlight

;Initialize the SPice connector for the SPice10211 

                ClrU
                setu            0,3             ;set spice connector pin 4 as analog input
                setu            1,3             ;set spice connector pin 5 as analog input
                setu            2,3             ;set spice connector pin 6 as analog input
                setu            3,3             ;set spice connector pin 7 as analog input
                setu            4,4             ;set spice connector pin 8 as analog output
                setu            5,4             ;set spice connector pin 9 as analog output
                SpiceConfigU

Loop:
                AnInF
                OBLCD_SetCur    0,0
                OBLCD_UDecDispXFW

                AnInE
                OBLCD_SetCur    0,7
                OBLCD_UDecDispXFW

                GoTo            Loop