SPLat Logo

HMI430/700 Panel Bezel Update

NOTICE: Our web site is being updated, but is currently experiencing extreme slowness due to host issues. Please contact us directly.
NOTICE: SPLat Controls has moved. We are now at 1/85 Brunel Rd, Seaford, 3198. map
SPLat will be shut down for the Christmas Holiday season from Friday 20 December 2024 through Tuesday 7 January 2025. We will check emails periodically and will continue to process orders but at a slower pace. Santa hat

We've updated the panel bezels for our HMI430 and HMI700 products.

Specifically, we've done away with the fiddly and obtrusive nuts on the front surface, so the bezel now has a much cleaner and neater appearance. Instead, we use self-tapping screws to attach the circuit board to the bezel from the rear. You still need to remove the minimal bezel that the board is supplied with before fitting the panel bezel.

Note that the cutout for the bezel has also changed.

For the HMI430, an STP file is available here and a DXF drawing is available here

For the HMI700, an STP file is available here, a DXF drawing is available here without dimensions or here with dimensions, and a PDF drawing with dimensions is available here