Due to limitations in Word Press, the text of the B1D file needs to be copied from below.

_logger.b1d:

;===============================================================================
; SPLat Controls. ;
; Product Development Group ;
; Melbourne, AUSTRALIA ;
;===============================================================================
;
;DESCRIPTION:
; SX10508 Logger default app build file.
;
;===============================================================================
;===============================================================================
; Copyright (c) 2013 SPLat Controls. All rights reserved. ;
; ;
; THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF SPLat Controls. ;
; The copyright notice above does not evidence any ;
; actual or intended publication of such source code. ;
;===============================================================================
HEADERSEG ;Initial header comments for whole program
CONSTSEG ;Very early for easy access
MEQUSEG ;PermStore, ModBus absolutes etc.
IOSEG
DEF_SEM ;defSEM directives
DEF_BYTE ;defBYTE directives
DEF_WORD ;defWORD directives
DEF_TIME24 ;defTIME24 directives
DEF_FLOAT ;defFLOAT directives
DEF_BLOCK ;defBLOCK directives
POWERONSEG ONEONLY
INITSEG ;each module can do it’s initialisation here
LAUNCHSEG ONEONLY
CODESEG
DEBUG DISCARD ;Enable as required for debug code
TESTSEG DISCARD ;Enable as required for test code
NVEM0DIR ONEONLY ;Marker for the start of non-volatile memory
NVEM0MODBUSDATA ;MODBUS NVEM data goes FIRST!
NVEM0DATA
DOCCOSEG DISCARD

;===============================================================================
;
; FILE LIST
;
;===============================================================================
#— ;Special marker that identifies the start of the file list
datestamp.spt
io.spt
launch.spt
logger.spt
filesys.spt
seriallog.spt
rtccal.spt
ui.spt
xwirelog.spt
xwirephys.spt